-
-
Keep framework and Tower Guide Support clean of dirt build-up, grease, and oil residues.
-
Check for worn or broken air lines and connections.
-
If supplied, check that all casters are in the locked position.
-
-
-
Test all case width and length adjustments and check for binding.
-
Check Major Flap Folding Plates and Rollers for damage. Clean as required.
-
Inspect Case Hold-Down Rollers (Red) #25-386. Replace if worn or damaged.
-
-
-
Lubricate adjusting lead screw as required with a food-grade grease or a synthetic Teflon grease.
-
Inspect all pneumatic switches to ensure that they are properly adjusted and in good working order.
-
Inspect all pneumatic cylinders and connections for worn or broken parts.
-
Inspect Tee (floor adjustment) Vertical Guide Track to ensure that it is not bent or loose, and that the UHMW PS tape is not worn or missing.
-
Inspect Cam Followers for wear and ensure that they properly slide in contact with guide slots.
-
Inspect Front and Rear Minor Flap Folders. Replace if bent or worn.
-
Check that leg extensions are properly secured. Lubricate Swivel Caster(s) if equipped.
-
Check for any loose or missing fasteners.
-
