-
-
Keep framework and case former section guide rail for the movable ‘tower’ folder clean of dirt build-up, grease, and oil residues.
-
Inspect for worn or broken electrical connections.
-
Check for worn or broken air lines and connections.
-
If supplied, check that all casters are in the locked position.
-
-
-
Cycle case width and length adjustments and check for binding.
-
Clean and lightly lubricate the tower folder guide rail with a food-grade grease (JAX Magna-Plate 44-2 from Behnke Lubricants, or equivalent), a synthetic Teflon grease (Loctite – Super Lube) or appropriate equivalent.
-
Check Major Flap Folding Plates and Skate Wheels for damage; clean and lubricate as required.
-
Inspect case hold-down rollers (Red) #25-547. Replace if worn or damaged.
-
Cycle the width adjustment and check for binding.
-
-
-
Lubricate case width adjustment screw with a food-grade grease (JAX Magna-Plate 44-2 from Behnke Lubricants), a synthetic Teflon grease (Loctite – Super Lube) or appropriate equivalent.
-
Inspect all pneumatic cylinders and connections for worn or broken parts.
-
Inspect the Vertical Guide Tracks (bottom major flap ‘floor’ switch adjustments) to ensure that they are not bent or loose.
-
Inspect Cam Followers for wear and ensure that they properly slide in contact with guide slots. Lubricate track and guides as required with a food-grade grease or a synthetic teflon grease.
-
Inspect Front and Rear Minor Flap Folders. Replace if bent or worn.
-
Check for any loose or missing fasteners.
-
