-
-
Keep framework and Tower Guide Support clean of dirt build-up, grease, and oil residues.
-
Check for worn or broken air lines and connections.
-
If supplied, check that all casters are in the locked position.
-
-
-
Clean and lightly lubricate the tower folder guide rail with a food-grade grease (JAX Magna-Plate 44-2 from Behnke Lubricants, or equivalent), a synthetic Teflon grease (Loctite–Super Lube) or an appropriate equivalent.
-
Check Major Flap Folding Plates and Rollers for damage. Clean as required.
-
Inspect case hold-down rollers (Red) Z25-386 or Z25-547. Replace if worn or damaged.
-
Test all case length and width adjustments and check for binding.
-
-
-
Lubricate adjusting lead screws as required with a food-grade grease or a synthetic Teflon grease.
-
Inspect all pneumatic switches to ensure that they are properly adjusted and in good working order. Inspect all pneumatic cylinders and connections for worn or broken parts.
-
Inspect the Vertical Guide Tracks (bottom major flap Floor switch adjustments) to ensure that they are not bent or loose.
-
Inspect Cam Followers for wear and ensure that they properly slide in contact with guide slots.
-
Lubricate track and guides as required with a food-grade grease or a synthetic Teflon grease. Inspect both Minor Flap Folders. Replace if bent or worn.
-
Check that leg extensions are properly secured. Lubricate Swivel Casters if equipped.
-
Check for any loose or missing fasteners.
-
