-
-
1-Uncrate the machine and remove any packing material from the interior.
-
2-Remove from underneath any supports used to protect components during shipping.
-
3-Install the legs at each of the three positions on the machine frame.
-
4-Secure each leg with one nut and washer underneath the frame and another nut and washer on the inside.
-
-
-
Use a spirit level to ensure your machine is level (parallel) to the ground to ensure safety, optimum performance, and to avoid frame stress.
-
Secure your machine to adjoining equipment to prevent unexpected movement during its operation.
-
-
-
To prevent unexpected machine cycling, depress the stop button to the off position before connecting an air supply to your machine.
-
1-Connect a dedicated air supply to your machine or an air supply from adjoining equipment.
-
Note: The supply must be clean factory air and must be lubricated by the unit on the machine.
-
2-Air pressure should be set to 80 psi for most applications with a minimum setting of 65 psi and maximum of 100 psi.
-
