How to Adjust For Case Sizes (DEKKA 100)

Use the following instructions to set up the DEKKA 100 to seal a particular case size with adjustments for case width (D) and closed height (H).

Ensure that the machine is disconnected, or locked‐out and tagged‐out from the power supply before making any adjustments or changes.

There are two main quick adjustments required to set up a particular case size:

1. Case Width Adjustment (D): Adjusts the Case Width Guides to fit the width of the case.
2. Case Height Adjustment (H): Adjusts the height of the Top

1. Use a sample case to adjust the width.
2. Tilt the case guide rails forward to unlock the width adjustment mechanism.
3. Move the guides in or out until they lightly contact the sides of the case. Both guides will move together in a self-centering action.
4. Return the guides to the horizontal locked position.

1. Turn the height adjustment wheel to raise the Top Tapehead Holder.
2. Place a closed sample case under the Top Tapehead holder.
3. Turn the height adjustment wheel to lower the Top Tapehead Holder so that it lightly contacts the closed case.
4. Record the indicated height along the Case Height Ruler.

1. Determine the case you will seal and its previously recorded height.
2. Turn the height adjustment wheel to the correct height along the Case Height Ruler.

NOTE: Depending on case fill, some minor adjustment may be further required in order to firmly tape down the top flaps.

Thank you for contacting us. For us to better assist you, please reach out to our technical support by phone at 1.888.565.3219 or 604.930.9300 or by email at Wexxar.Service@promachbuilt.com or Wexxar.Parts@promachbuilt.com along with your machine model and serial number. One of our tech support reps will be glad to answer any questions you may have.