Introduction
The Wexxar WF-30T with Auto-Adjust is a fully automatic case former with tape sealing that includes our Auto-Adjust servo technology for quicker and more accurate repeatable case size changes.
- Auto-adjust: Machine makes four major case dimension adjustments automatically, controlled via the HMI.
- Accurate and repeatable through use of closed loop servo technology
- Compact, in-line design; highest quality, widely available hardware
- Unmanned operation; remote demand control
- Case opening without vacuum; WEXXAR patented technology
- High capacity case feed magazine
- Positive case squaring and flap alignment
- Cases formed and delivered upright
- Broad case size range, easy set-up guides, easy operation and care
- Tilt-out tape head allows quick, easy tape roll change
Standard Specifications
| Case Size Range |  |
|---|---|
| Speed | Up to 30 cases per minute depending on case size and case quality |
| Auto-Adjust Change-Over Time for Case Changes: | Less than 5 minutes for tool-less size change (within the same size range/ zone) OR as little as 3 minutes if the size change does not span the adjustment’s full range. |
| Shipping Weight | Approx. 1350 lbs. |
| Power Requirement | 240VAC, 1 Phase, 60Hz 10.2A OR 480VAC, 1 PHase, 60Hz 12A |
| Air Requirement | 27 SCFM; 0.90 cu. ft. per cycle at 90 p.s.i. (6 bar) |
| Machine Dimensions | MAXIMUM: Length x Width x Height: 156" x 49" x 85" without feet OR 139" x 77" x 67" without feet |
| Infeed Height | MINIMUM: 31" with adjustable leg extensions (feet) MAXIMUM: 36" with adjustable leg extensions (feet) |
| Outfeed Height | MINIMUM: 24" With adjustable leg extensions (feet) MAXIMUM: 29" with adjustable leg extensions (feet) (See diagram below) |
| Construction | Aluminum, stainless steel and plated steel |
| Controls | NEMA 12 UL/CSA listed standard electrical control Auto-Adjust Servo 24VDC Meets N.F.P.A.-79 standard 24 volt DC power supply built in for safe, low voltage operating controls PLC operated sequence and timing control Touch Screen (8” color) HMI for machine control and monitoring |
| Tape System | DEKKA Model WEX-22 tape applicator heads |
| Case Styles | R.S.C., H.S.C. or C.S.S.C. For other styles consult your WEXXAR representative |
| Other | Lock-out tabs on electrical and air main shut-offs Many optional features for the widest range of applications |
All above specifications are subject to change depending on options chosen and/or case characteristics.
0 Comments