How to Operate the Machine (DEKKA 500)

1. Turn ON the MAIN AIR REGULATOR.

2. Turn ON the MAIN DISCONNECT. Wait for the Programmable Logic Controller (PLC) and the HMI control screen to complete their startup cycles.

NOTE: The main supply voltage is typically 120V 60Hz single phase, but alternate voltages are available to meet specific customer requests.

3. To begin operation, pull out the E‐STOP button and push the RESET button on the control panel, then touch the START button on the HMI screen.

Do not manually feed cases. Doing so will bring you in close proximity to moving components that may cause serious injury.

• Lockout / tagout your machine before clearing any case jams or when making adjustments.
• Alternatively, and depending on the severity, you can clear case jams without opening a guard door or shutting down the machine by jogging individual steps of the box forming sequence.

Thank you for contacting us. For us to better assist you, please reach out to our technical support by phone at 1.888.565.3219 or 604.930.9300 or by email at Wexxar.Service@promachbuilt.com or Wexxar.Parts@promachbuilt.com along with your machine model and serial number. One of our tech support reps will be glad to answer any questions you may have.