WF-Series Preventive Maintenance Schedule

• Visually inspect the case former for loose fasteners, leaks in the pneumatic system, and drain bottle overflow.
• Ensure that the leadscrews are adequately lubricated with a recommended lubricant
• Clean the tape knife on the Tape Head with WD-40 or a similar low-toxicity cleaner and lubricate the blade guard pad with silicone. (if applicable)
• Remove any glue residue from the machine. (if applicable)
• Inspect the hot melt system for leaks. (if applicable)

• Check reducer lubricant level, and replenish as required.
• Check conveyor belt condition, tracking, and tension. (To replace a conveyor belt, see How to Change a Discharge Belt)

• Thoroughly clean all adjustment screws, sprockets, chain and sliding components, and then lightly grease with a recommended lubricant
• Grease guide wheels on mast with a recommended lubricant

• Grease guide wheels on mast and discharge pusher with a recommended lubricant

Thank you for contacting us. For us to better assist you, please reach out to our technical support by phone at 1.888.565.3219 or 604.930.9300 or by email at Wexxar.Service@promachbuilt.com or Wexxar.Parts@promachbuilt.com along with your machine model and serial number. One of our tech support reps will be glad to answer any questions you may have.