Introduction
⚠️ To mount your Dekka SE V3 Tape Head, see the Dekka SE V3 Quick Start Guide.
⚠️ Follow the steps below for the Dekka E Tape Head.
-
-
Release the two knobs on either side of the Top Holder by turning them counterclockwise.
-
-
-
Insert your Tape Head into the Top Holder, and then slide the four pins into the Mounting Slots.
-
Turn the two Top Holder knobs clockwise to Lock the Tape Head in place.
-
-
-
Insert a Tape Head into the Bottom Holder.
-
Slide the two pins into the Mounting Slots.
-
Pivot the remaining two pins into the Mounting Slots.
-
Thank you for contacting us. For us to better assist you, please reach out to our technical support by phone at 1.888.565.3219 or 604.930.9300 or by email at Wexxar.Service@promachbuilt.com or Wexxar.Parts@promachbuilt.com along with your machine model and serial number. One of our tech support reps will be glad to answer any questions you may have.
Thank you for contacting us. For us to better assist you, please reach out to our technical support by phone at 1.888.565.3219 or 604.930.9300 or by email at Wexxar.Service@promachbuilt.com or Wexxar.Parts@promachbuilt.com along with your machine model and serial number. One of our tech support reps will be glad to answer any questions you may have.
Cancel: I did not complete this guide.
One other person completed this guide.
